RentCafe Property Availability Integration: How to Add Apartment Availability to a Custom Website
A prospect picks a floor plan on your website, requests a tour, and learns the unit was taken yesterday. Still, your leasing team did nothing wrong. Your property management system knew, but your website did not. RentCafe property availability integration closes that gap by carrying unit status from RentCafe to your own site. So this guide shows how the data flows, what to build and where projects usually break.
Short answer: To integrate RentCafe availability into a custom website, get approved access from Yardi, pull unit data on a schedule, then store a clean copy on your server and display that copy on your pages. Do not call the source on every page view, because that slows pages. However, most projects deliver near real-time availability, not instant updates.
What is RentCafe property availability integration?
RentCafe property availability integration is the connection that sends unit status, pricing and move-in dates from RentCafe to your own website. Your site reads that data through a RentCafe availability API or an approved feed, then shows current units to visitors. As a result, it replaces manual edits with a repeatable data flow.
In plain terms: RentCafe holds the source data, your sync job reads it, your database stores a copy and your pages display that copy.
Apartment availability integration covers vacant units only, whereas apartment inventory integration is the wider job: syncing every property, floor plan and unit, so availability can be calculated and displayed correctly. RentCafe says its own listings come from managed properties with up-to-date pricing and availability. However, a custom website needs its own connection to that same source.
What data does an availability integration need?
Plan for four groups of data: property details, floor plans, unit records, and availability with pricing. Vendor integration guides describe pulling units, pricing, availability, amenities and pet policy, but your exact fields depend on your account. Therefore, confirm the list with Yardi before you design your database.
| Data | Why your site needs it | How it appears |
|---|---|---|
| Property and floor plans | Page structure and filters | Floor plan cards |
| Unit identifier | Matching records between syncs | Internal only |
| Availability status | Deciding what to show | “Available” badge |
| Date available | Setting expectations | “Available Nov 15” |
| Price or range | Comparison | Starting-at price |
| Photos, amenities, pet policy | Trust and conversion | Unit detail page |
So treat this as a planning list, not a field list. The unit identifier matters most, because every later step depends on matching the same unit across syncs.
Is real-time apartment availability really real-time?
Usually it is near real-time. Most integrations refresh on a schedule, such as hourly, because calling the source on every page view is slow and can hit request limits. Real-time apartment availability is the goal. However, a freshness budget tells you what delay your leasing team can accept.
Set your budget with one question: how long can a unit be wrong before it costs a lead or a wasted tour? Then refresh at a fraction of that time. For example, a reasonable starting point is hourly for availability and daily for floor plans and photos. Then tighten it only after testing shows the source and your server can handle it. Some leasing platforms refresh Yardi feeds hourly, and other property systems advise setting a polling interval to avoid throttling.
Who needs a RentCafe property availability integration?
You need one if your website is not hosted by RentCafe and visitors should see current units on it. In short, property managers, marketing managers and developers planning a custom website are the main audience. However, if you already use a RentCafe website, availability flows there and you can skip the build.
How do you integrate RentCafe availability into a custom website?
Follow six steps: define what must be accurate, get approved access, map fields, build a scheduled sync, store a clean copy, and display it with fallbacks. Each step removes a specific risk, such as stale data, duplicate units or slow pages.
- Define what must be accurate. List the fields visitors act on: status, date available and price. A small scope, therefore, keeps the build reliable.
- Get approved access. Ask Yardi which RentCafe availability API or feed your account can use. For example, vendor setup guides mention property codes, API tokens and features that a Yardi representative must enable. Otherwise, projects stall late when credentials arrive after the build starts.
- Map the fields. Match unit IDs and floor plan names between RentCafe and your site, so a renamed floor plan does not create a duplicate.
- Build a scheduled sync. Because a background job requests data at your chosen interval, page speed stays independent of the source.
- Store a clean copy. Then save normalized units in your database with a last-synced timestamp. Also use read-only access where the source allows it, and never expose credentials in browser code.
- Display with fallbacks. Instead of a blank page, show the last good data and a notice if a sync fails.
Our RentCafe API WordPress integration guide covers the WordPress version of this build. Also, Yardi’s RentCafe APIv2 announcement is useful background on how access is structured.
How should availability appear on your website?
Show only what a prospect can act on: available units with a date, a price or range, and a clear next step. Next, hide leased units, label future dates honestly and link each unit to a tour or inquiry form. As a result, clear status reduces calls about units that are gone.
Two illustrative examples, not client results. For example, a Chicago operator with several buildings may need filters by building and neighborhood. Meanwhile, a Los Angeles operator with large communities and a frequently changing unit mix may prefer floor plan cards with a count of available homes.
How does availability integration affect lead capture?
Live availability makes tour scheduling and inquiry forms more accurate, because visitors choose units that exist. For instance, each inquiry can carry the unit, price and move-in date into your CRM, giving leasing teams context. Slow pages hurt the same flow, so serve cached data.
Some integration vendors describe pushing website leads back into the property management system as guest cards, so ask what your account supports. If you only do one thing, send the unit ID with every inquiry. For broader tactics, see our real estate WordPress lead generation guide.
What should you test before launch?
Test the unusual cases, not only the normal one, before any visitor sees the data. For example, lease a unit, change a price, remove a unit, rename a floor plan and break the connection on purpose. In short, a good integration either updates correctly or fails safely, every time.
| Test | Expected result |
|---|---|
| Unit leased in RentCafe | Disappears within your refresh window |
| Price changes | New price after the next sync |
| Floor plan renamed | No duplicate listing |
| Source unavailable | Last good data shown, team alerted |
| Missing or duplicate unit ID | Logged and held back, not shown wrong |
When should you not build a custom integration?
Skip a custom build if you manage one small, stable community, if a RentCafe website already shows your availability, or if nobody will monitor the sync. Custom integrations, however, need upkeep. Compare your options in our guide to RentCafe API vs manual property listings.
What affects the cost and timeline?
Cost and timeline depend on access approval, the number of properties, how much custom design you need and how clean your unit data is. Also, rules such as pre-leasing dates or multiple buildings add testing time. We don’t publish prices here because they depend on scope. Useful checkpoints: credentials approved, field mapping signed off, one-property pilot live, then full rollout.
When should you hire a specialist?
Hire help when you manage several communities, rely on accurate availability for tours and leads, or lack developers to maintain the sync. A specialist also handles access, mapping, caching and monitoring. If you manage Chicago properties, see our RentCafe API integration for Chicago property management websites.
Frequently asked questions
What is RentCafe property availability integration?
It is the connection that sends unit status, pricing and move-in dates from RentCafe to your own website. A scheduled sync reads the data, stores a clean copy on your server, and your pages display it. As a result, visitors see current units without anyone editing the site by hand.
Is there a RentCafe availability API for custom websites?
Access to RentCafe data is arranged through Yardi, and the exact API or feed depends on your account. Vendor setup guides mention property codes and API tokens, and some features must be enabled by a Yardi representative. So ask Yardi what your account supports before you plan the build.
Can I show real-time apartment availability on my website?
Not instantly, but you can show near real-time availability. Most integrations refresh on a schedule, such as hourly, because calling the source on every page view is slow and may hit request limits. Decide how long a unit can be wrong before it costs you a lead, then set your refresh interval below that.
How often should apartment availability sync?
Match the schedule to how fast your data changes. For example, hourly is a reasonable starting point for availability, with daily refreshes for floor plans and photos. Confirm any request limits with Yardi, then monitor the last successful sync so you notice quickly if updates stop.
What is the difference between apartment availability integration and apartment inventory integration?
Apartment availability integration shows which units are vacant and when they can be rented. Apartment inventory integration is broader: it syncs every property, floor plan and unit so availability can be calculated correctly. Most projects need both, because accurate availability depends on clean inventory records and a stable unit identifier.
Can I integrate RentCafe availability without WordPress?
Yes. The sync can run on any stack that can schedule a background job, store data and serve pages. WordPress is one option, but it mainly suits teams that already manage content there. The key requirements are approved access, a stable unit identifier, caching, monitoring and a fallback when the source is unavailable.
How do I stop my website from showing leased units?
Refresh on a schedule, store a last-synced timestamp, and hide any unit that is no longer reported as available. Then test this by marking a unit leased in a test property and confirming it disappears within your refresh window. Alert your team if the sync stalls so stale units never linger.
How long does a RentCafe availability integration take?
It depends on access approval, the number of properties, field mapping and how much custom design you need. Also, waiting for credentials can affect the schedule. A one-property pilot is a sensible first milestone, because it exposes mapping and sync problems before you roll out to the whole portfolio.
Key takeaways
- RentCafe property availability integration moves unit status from RentCafe to your own website.
- Real-time apartment availability usually means near real-time.
- Pull on a schedule, then store a clean copy and display that copy.
- The unit identifier is the key that holds the sync together.
- Test leased units, price changes and a failed connection before launch.
- Finally, confirm access and fields with Yardi first.
- Real Estate WordPress: Complete Guide to Build a High-Converting Property Website (2026)
- How to Generate Leads from Property Website (2026 Guide)
- RentCafe API Integration for Chicago Property Management Websites
- How to Build a Chicago Apartment Website Using RentCafe API
- RentCafe API for Chicago Multifamily Property Websites
- How Chicago Property Managers Can Integrate RentCafe Listings
- Custom Chicago Property Search Website with RentCafe API
- Chicago Apartment Availability Integration with RentCafe API
- RentCafe API Integration Services in Chicago
- Chicago Multifamily Website Development with RentCafe
- How to Display Floor Plans on a Chicago Apartment Website Using RentCafe API
- Best RentCafe API Website Development Company for Chicago Property Managers
- RentCafe API vs Manual Property Listings: Which Is Better for Multifamily Websites?
- RentCafe Property Availability Integration Guide
- RentCafe API Floor Plans, Pricing and Availability
- RentCafe API Integration Cost: What Affects the Price